réseau eau potable
2 November 2026

Cast iron fittings: discover what they’re used for and their characteristics

Introduction to cast iron fittings for drinking water supply networks: characteristics, applications and compatibility

The drinking water network distributes water fit for human consumption to homes, businesses and public facilities.

In this network, the choice of fittings determines how reliable the pipework is. Fittings play an important role in this ecosystem. They are most often made of ductile cast iron, a standard material used in drinking water distribution networks.

In this informative article, we take a look at the uses of cast iron fittings in the main distribution network.

What is a cast iron fitting?

A cast iron fitting is a connecting piece used to join sections of pipework in a drinking water network. In this case, we are referring to the main distribution network (drinking water supply), upstream of the household-to-mains connection (the installation that connects the consumer to the drinking water supply).

The fitting can come in various shapes and sizes depending on its intended use.

Uses of cast iron fittings in the drinking water network

Cast iron fittings are used at various points in the water distribution network:

  • Changes in direction and diameter: elbows, tees and reducer tapers are used to adapt the pipe route to the constraints of the terrain (roads, existing structures and changes in level).
  • Tapping and branch connections: the installation of new network branches, particularly during network extensions or when connecting new areas.
  • Multi-material couplings: Cast iron fittings can act as multi-material transition pieces, providing a watertight seal and ensuring that the joint between two pipes is structurally sound. For example, when an existing cast iron network needs to be extended or repaired using PE pipes, or vice versa.
  • Network renewal: Pipes and fittings to be replaced.
  • Valve components: cast iron flanges provide the interface between the pipework and valves, air valves or fire hydrants.

Check out our product ranges on the Claire Group Connections & Networks page.

Raccord fonte ADG

Characteristics of cast iron fittings

A cast iron fitting that is renowned for its robustness

Ductile cast iron withstands localised mechanical stresses, such as differential settlement, heavy vehicle traffic above the pipe, and impacts during nearby excavation work, better than most plastic materials. This robustness reduces the risk of failure at critical points in the network, precisely where stresses are concentrated.

Exceptional pressure resistance

Cast iron fittings designed for drinking water supply systems are sized to withstand the standard operating pressures of distribution networks, with safety margins that make them suitable for areas with high static pressure (low points in the network).

Outstanding service life

When properly installed and protected against corrosion, cast iron has a service life measured in decades, comparable to that of HDPE in high-stress areas.

Multi-material compatibility of cast iron fittings

Many product ranges are designed to connect pipes made of different materials and with different external diameters directly, without the need for additional transition pieces. This compatibility makes it easier to carry out repair or extension work on mixed networks comprising pipes of different types, which is very common in real-world applications.

How are cast iron fittings installed?

There are a few specific rules that must be followed during installation to ensure the assembly is watertight and durable:

  • Check that the diameters and pressure classes of the fitting and the pipe are compatible, by referring to the manufacturer’s technical data sheets.
  • Clean and inspect the mating surfaces (seal and flange) before assembly to prevent any leaks caused by foreign bodies.
  • Adhere to the recommended bold tightening torque and sequence for flanged assemblies to avoid weakening the seal or failing to tighten the connection sufficiently.
  • Anchor or buttress any critical points that are exposed to hydraulic thrust (elbows, tees and reducers) using concrete thrust blocks or mechanical locking devices, depending on the configuration.
  • Carry out a pressure test once installation is complete, in accordance with current standards, before the section is put back into service.

At metal/plastic multi-material couplings, special care must be taken to address the risk of differential expansion: the two materials do not react in the same way to temperature changes, which is why restrained lock fittings specifically designed for this type of transition should be used.

FAQ

Can a cast iron fitting connect two pipes made of different materials and with different diameters? Yes, many ranges of cast iron fittings are specifically designed to be compatible with different materials, provided that the manufacturer’s recommendations regarding diameters and pressure classes are adhered to.

What is the difference between ductile cast iron and malleable cast iron? Ductile cast iron (spheroidal graphite) is the gold standard material for fittings and pipes used in drinking water supply systems, owing to its mechanical strength. Malleable cast iron is used for other applications, particularly in heating and gas networks.

What service life can be expected from a cast iron fitting on a drinking water supply network? With suitable corrosion protection and when installed in accordance with the recommendations, a ductile cast iron fitting can have a service life of several decades (over 50 years).